check text - please help ;]

[acradal]

Glass-making industry

New technology of laminating glas.

Laminate panes are made by use of PVB foil in special lines equipped into the autoclave. The cost of such a line much exceeds 500000 euro and is available only for bigger companies. Panes can be bond by resining too, however this technology is much difficult, troublesome and less efficient. However by that technology it is possible bonding together the uneven area and implementing decorative elements between panes.
At the fair in Duseldorfie in 2004 technologies were being shown for laminating of panes with a new foil of a new generation. Fair in Milan 2005 confirmed technology development offered by the number of companies. At the BUDMA 2006 fair Polish EPO company showed stove for laminating EPL- 24 in the very attractive price, what meets with big interesting from theof producers of panes. This technology combine PVB technologies with resining technology , and equipment used for the production are much cheaper from PVB line.


Technological process

The technological Process is based on the "CAP-foil" which during the process gets geling and filling in all uneven area ,similarly as resin. Panes are united in the special stove equipped into vacum pockets. In the process the temperature is about 150 oC its needs inspection of the temperature-temporary curve and the curve of growing vacum. Process parameters sa usually controlled through specialize PID adjusters.

The foil is being put between panes or if we produce panes with additional decorative separator we use two foils and decorative material putted between them.
In the process of heating , foil become geling and next hardening and get togther with panes sheets.

I think, i made lot of mistakes , can anyone check this ?

[Gillnetter]

Glass-making industry

New technology of laminating glas.

Laminate panes are made by the use of PVB foil in special lines equipped into the autoclave (Do the lines go into an autoclave?). The cost of such a line much exceeds 500000 euros and is available only for bigger companies. Panes can be bond by resining too, however, this technology is much more difficult, troublesome and less efficient. However, by using that technology it is possible to bond bonding together the uneven areas and implementing implement decorative elements between panes.

At the fair in Duseldorfie in 2004, technologies were being shown for laminating of panes with a new foil of a new generation.
The fair in Milan in 2005 confirmed technology technological development offered by the a number of companies. At the BUDMA 2006 fair, the Polish EPO company showed a stove for laminating EPL- 24 in at a the very attractive price, what meets with big interesting which drew much interest from theof the producers of panes. This technology combines PVB technologies with resining technology and the equipment used for the production are much cheaper from (than?) a PVB line.


Technological process

The technological process is based on the "CAP-foil", which during the process, gets geling and filling in all uneven areas ,similarly as similar to using resin. Panes are united in the a special stove that is equipped into with vacum vacuum pockets. In the process, the temperature is about 150 oC. its needs An inspection of the temperature-temporary curve and the curve of the growing vacum vacuum is needed. Process parameters sa are usually controlled through specialize PID adjusters.

The foil is being put between panes or, if we produce panes with additional decorative separator, we use two foils and decorative material putted are put between them.
In the process of heating the foil become geling first gels and next hardening then hardens and then get togther melds with the panes sheets.

I think, i made lot of mistakes , can anyone check this ?

Since I am not sure of the technology involved here, there may be mistakes in the text.

[acradal]

Thnx very much :P